Emissions and Cranckcase Ventilation Issues |
|||||
|
|||||
|
Now the really cool part of all this 'scavenging'
stuff. If look closely at the post... '75 air pump and air rail system, you'll find
a cheap supply of these large bore PCV valves have been right under your noses all along.
Just cut that pipe about four inches long ( to look like the kit pieces) and weld it in your exhaust. The crankcase breather 'top' is 'off-the-shelf' at nearly any auto parts store. The only custom pieces are the fuel pump / block interface, and or a proper air/oil separator on the valve cover. |
Emissions and Cranckcase Ventilation Issues |
|||||
|
|||||
|
©1987-2010
All material copyright© Teglerizer 1996-2008last edited
3/15/08
hits since last reset
index